2014 International Workstar recalls
The 2014 International Workstar is covered by 4 recall campaigns. Repairs are free at a dealer; check your VIN to see which are still open.
| Campaign | Received | Component |
|---|---|---|
| 15V776000 | 2015-11-20 | Vehicle Speed Control › Accelerator Pedal |
| 15V241000 | 2015-04-22 | Visibility › Defroster/Defogger/Hvac System › Fan/Motor |
| 14V807000 | 2014-12-22 | Exterior Lighting › Headlights |
| 14V201000 | 2014-04-17 | Service Brakes, Air › Disc › Caliper |
Each recall: problem, risk and fix
Vehicle Speed Control › Accelerator Pedal (15V776000, 2015-11-20)
Problem: Navistar, Inc. is recalling certain model year 2013-2014 International ProStar and DuraStar trucks manufactured April 26, 2012, to April 4, 2013, WorkStar trucks manufactured April 27, 2012, to March 29, 2013, LoneStar trucks manufactured May 21, 2012, to April 2, 2013, and TranStar trucks manufactured April 30, 2012, to March 25, 2013. In the affected vehicles, the accelerator pedal position sensor can move and result in a high engine idle.
Risk: A high engine idle may make downshifting the transmission difficult and the engine brake may be disabled. These factors may hinder slowing down the truck when descending a long grade, thereby increasing the risk of a crash.
Free fix: Navistar will notify owners, and dealers will recalibrate the electronic control module (ECM) to allow it to recognize that the pedal is at the idle position, free of charge. The recall began on January 19, 2016. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15517.
Visibility › Defroster/Defogger/Hvac System › Fan/Motor (15V241000, 2015-04-22)
Problem: Navistar, Inc. (Navistar) is recalling certain model year 2011-2015 International DuraStar, ProStar, TranStar and WorkStar, 2012-2015 International TerraStar, 2013-2015 International LoneStar and IC Bus HC, and 2014-2015 IC Bus AC vehicles. A vehicle double battery jump start or electrical load dump event could result in an overvoltage condition of a component within the HVAC system linear power module (LPM) which is used to control the blower speed. The overvoltage condition could result in the overheating and failure of the LPM.
Risk: If the LPM overheats and fails, there is an increased risk of a fire.
Free fix: Navistar will notify owners, and dealers will replace the LPM with an upgraded one, free of charge. An interim letter was mailed to owners on June 18, 2015. A second notification will mailed when parts become available. The recall began on August 6, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15509.
Exterior Lighting › Headlights (14V807000, 2014-12-22)
Problem: Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 International WorkStar vehicles manufactured March 16, 2012, to October 1, 2014. In the affected vehicles, the headlight low beam and ground circuits may have been reversed at the headlight connector resulting in reduced light output. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 108, "Lamps, Reflective Devices, and Associated Equipment."
Risk: Reduced light output may impair the driver's vision, increasing the risk of a crash.
Free fix: Navistar will notify owners, and dealers will correct the wiring in headlight harness connector, free of charge. The recall began on December 29, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 14525.
Service Brakes, Air › Disc › Caliper (14V201000, 2014-04-17)
Problem: Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 International DuraStar vehicles manufactured November 2012 through December 2013, International WorkStar vehicles manufactured December 2012 through January 2014, and 2014-2015 International TranStar and International ProStar vehicles manufactured January 2013 through February 2014. The affected vehicles are built with air disc brake feature codes 04WEY, 04WEZ, or 04WZK. These vehicles may have an incorrect number of bolts mounting the brake caliper to the caliper mounting plate and some of the bolts may be improperly torqued.
Risk: If the air disk brake caliper has loose or missing bolts, the air disk brake caliper may come loose from the mounting plate causing the vehicle to pull left or right while braking and lengthening the distance needed to stop, increasing the risk of a crash.
Free fix: Navistar will notify owners, and dealers will replace any missing bolts and check the torque of all of the air disk brake caliper bolts, free of charge. The recall began on May 7, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 14508.
Other model years: 2011 · 2012 · 2013 · 2015 · 2016 · 2017 · 2018 · 2019 · 2020 · All International Workstar recalls